Tuesday, 18 September 2012

Getting Start with EFT930G Terminal
















 SAGEM EFT930G POS Terminal we have to do the following:

  1. Look inside the folder where you installed the Telium SDK  in C:\Program Files\SDK30\SDK 9.4.0\. now go toComponent\OS folder. At that Folder you will see  m31 files. If your terminal is for MOCK-UP, upload the EFT930_MOCKUP.M31 and if it is for production, upload the file EFT930_DIR_PROD.M31
  2. When uploading is finished, “Disconnect” the terminal. The terminal will reboot and returns to LLT mode.
  3. Now the time to load managers file. It is also necessary for handling other application for running.
  4. “Connect” the terminal again, but this time, look for the \Component\Manager folder. In this folder, there are 4 flavors to choose from: EFT930_export_PROD.M31, EFT930_health_PROD.M31,EFT930_interne_PROD.M31, and EFT930_spain_PROD.M31. In our case, we usually select interne or export. Upload the selected telium manager by dragging the file.
  5. Disconnect the terminal. When the terminal reboots, it will ask for several parameters (if the application will be using GPRS radio, do not forget to select GPRS to AUTO and fill up the APN)
  6. When loading of manager is finished, the terminal will reboot again but this time the words “LOAD APPLICATION” will be displayed on screen.


Posted by at

13 comments:

  1. Unknown17 December 2012 at 09:24

    Can you check your mail Devraj

    ReplyDelete
  2. devraj singh11 January 2013 at 02:38

    yes ofcourse.
    now tell what to do??

    ReplyDelete
  3. Anonymous8 October 2013 at 04:14

    Hello,
    I am French and I live in France, I would like to know if I bought a 930G EFT (GPRS) to an English seller (especially) will it be possible to change the language and will it be used in France? Will it be possible to set for use in France and in euro (€). In the event of a response thank you.

    Bonjour,
    Je suis français et je vis en France, je souhaiterai savoir si j'achète un EFT 930G (gprs) à un vendeur anglais (particulier) sera t-il possible de changer la langue et sera t-il utilisable en France? Sera t-il possible de le paramétrer pour une utilisation en France et en euro(€). Dans l'éventualité d'une réponse je vous en remercie.

    M Jean-éric

    Bonjour,
    Je suis français et je vis en France, je souhaiterai savoir si j'achete un EFT 930G (gprs) à un vendeur anglais (particulier) sera t-il possible de changer la langue et sera t-il utilisable en france? Sera t-il possible de le paramétrer pour une utilisation en France et en euro(€). Dans l'éventualité d'une réponse je vous en remercie.

    ReplyDelete
  4. Unknown9 October 2013 at 08:35

    How do i get hold of software communication between eft930 and pc

    ReplyDelete
  5. devraj singh9 October 2013 at 21:16

    @Cornelius Motetesi
    what do you want to ask ? please clear it.

    ReplyDelete
  6. Unknown20 April 2014 at 00:11

    I have two Terminal : One always stay in LLT mode can you help ?

    The second one when trying to copy file, it displays Bad Component Signature

    ReplyDelete
  7. Unknown16 May 2014 at 04:13

    When uploading is finished, “Disconnect” the terminal. The terminal will reboot and returns to LLT mode.

    The Terminal does not reboot at all. Can you please advise what the solution. The terminal stays on LLT mode all the time.

    ReplyDelete
  8. Anonymous20 February 2015 at 06:20

    Hello,

    Where can I find information how to develop software for SAGEM Monetel EFT930G Terminal?

    ReplyDelete
  9. Ponto da sorte 20 May 2016 at 07:35

    bom dia eu gostaria de sabert como resetar o menu do eft930g o terminal esta com uma aplicaçao eu tenho que remover pede uma senha e eu nao sei quale a senha

    ReplyDelete
  10. Unknown14 June 2016 at 12:33

    Dear,
    Do you know how to load app on terminal eft930s from pendrive?
    Thanks

    ReplyDelete
  11. marceloargentina16 June 2016 at 13:48

    buenos dias quiero conectar mi terminal eft930s ,a continuacion cargo los parametros y aparece en el visor la leyenda ERROR CONECTANDO CON TCONFIG.Como puedo solucionar dicho error.muchas gracias

    ReplyDelete
  12. Unknown24 November 2016 at 03:56

    Hello
    I need the SDK 30 \ SDK
    Can you send it to me on my mail migael85@gmail.com
    thank you

    ReplyDelete
  13. Anonymous7 September 2024 at 13:52

    Thanks and that i have a keen offer: Whole Home Renovation Cost house renovation services

    ReplyDelete

Subscribe to: Post Comments (Atom)