Friday 16 August 2013

Some usefull tips for easier development




Reset terminal
• Press «.» and «Yellow» keys at the same time
Turn to LLT mode
• Reset then hole «arrow up» key or access loading menu throug F0211
– Delete all software, including parameters files
• Reset, then at boot hold F1 («*» is displayed)
Then press quickly F4 («**» is displayed)
Then press quickly F2 («***» is displayed)
Then press quickly F3 («LLT» is displayed)

(F1, F2, F3, F4, delete all software except parameters files)
(Note that LLT or Simulator will work only if trace is not activated on USB. If EFT resets :
execute «reset» + «arrow up» to force LLT mode, download system.cfg with disable trace and restart

Delete one application
• Reset, then at boot when «- - -» appears, press quickly «F2» (or «2» on ICT220/250)
In menu, select «deletion», select one application, press «enter» and reset terminal again
Enter code «26» for selection by number, code «07» for selection in a list

To wake up an EFT930
• Press «paper feed» key
– To turn it off an EFT 930
• Execute a reset
(If outside the base, it will turn off. If on the base, it will just reset and stay power on)



10 comments:

  1. Hello , I am developer from Thailand.

    I would like to create app for ingenico ict220 for thai language.

    Could you tell me about that ( step by step ) ?

    Thank you very much.

    ReplyDelete
  2. yes you can use some samples codes to start your developing strategy step by step.

    ReplyDelete
  3. Mr Singh,

    I found you through your blog about telium application. I would like to learn about telium SDK coding, however, I don't seem to find any tutorial which might help me. I was wondering would it be possible to give to some direction or provide me with some helpful links from where I might be able to learn about this SDK? Thank you for your consideration.
    -------------------------------------------------------------------------
    -------------------------------------------------------------------------
    Go to your sdk installation directory run sample code ...

    C:\Program Files\SDK30\SDK 9.0.1\SDK\Samples

    you can take sdk document from this path..

    C:\Program Files\SDK30\SDK 9.0.1\Documents\

    ReplyDelete
  4. Hello am getting errors on my device IWB220
    CREATE DISK FAILURE
    FILE OPEN ERROR
    CONFIG FILE READ ERROR

    Please advice

    Thanks & Regards

    ReplyDelete
  5. Hi, i m interested to develop iWB220 apps. I m stranger in this development arena. Kindly suggest me all about where to start and how to continue from the sketch. my gTalk/Skype id: paul.pronabananda

    ReplyDelete
  6. Hello, can you help me in changing the bank logo in charge slip ??? We have ict220

    ReplyDelete
  7. hello, can you help me out in RSA key generation? and extracting publica and private key in ingenico terminal

    ReplyDelete
  8. Hello
    I need the SDK 30 \ SDK
    Can you send it to me on my mail migael85@gmail.com
    thank you

    ReplyDelete
  9. i got ingenico 220 it says no mid number how can i fix the problem

    ReplyDelete
  10. que debo hacer ya que mi punto dice LLT unauthorized que puedo hacer en ese caso

    ReplyDelete